大跨度大悬挑屋盖网架跨层提升施工技术

作者:张宁 陈萌 张伟 李松茂 杜琦 杨磊
单位:中建科工集团有限公司
摘要:成都天府国际机场T1航站楼屋盖网架平面投影面积约17.84万m2,其中D区大厅网架平面投影面积为约10.51万m2,网架厚度1.5~6.4m,最大跨度108m,最大悬挑长度约39m。根据网架投影所在的不同楼层进行合理分区,以网架投影所处楼层的不同划分提升分块,跨层累积提升后,再安装分块网架间的补档杆件,拼装为整体后提升至设计标高。此施工方法降低了网架拼装高度,施工简单,安全性高,节约措施量,大幅提高了网架结构施工效率。
关键词:钢结构网架拼装整体提升
作者简介:张宁,助理工程师,E-mail:594925197@qq.com。
基金: -页码-:114-116
尊敬的用户,本篇文章需要20元,点击支付交费后阅读
参考文献[1] 中冶京诚工程技术有限公司.钢结构设计标准:GB 50017—2017[S].北京:中国建筑工业出版社,2017.
[2] 中冶建筑研究总院有限公司,中建八局第二建设有限公司.钢结构工程施工质量验收标准:GB 50205—2020[S].北京:中国建筑工业出版社,2020.
[3] 中国建筑股份有限公司,中建钢构有限公司.钢结构工程施工规范:GB 50755—2012[S].北京:中国建筑工业出版社,2012.
[4] 王仕观,朱小兵,周彦鹏,等.郑州奥林匹克体育中心体育场单支点铰接立面桁架精确测量定位技术[J].施工技术,2019,48(20):74-76,80.
[5] 吴学敏.大跨度网架整体液压提升工艺探究[J].陕西建筑,2017(2):20-24.
[6] 莫涛涛.双向大跨钢屋盖网架结构整体提升关键技术研究[J].钢结构(中英文),2019,34(6):78-82,116.
Cross-story Hoisting Construction Technology of Large-span and Long-cantilever Roof Grid
ZHANG Ning CHEN Meng ZHANG Wei LI Songmao DU Qi YANG Lei
(China Construction Science and Industry Co.,Ltd.)
Abstract: The plane area of the roof grid for Chengdu Tianfu International Airport Terminal T1 is about 178 400 m2. The plane area of the Zone D grid is about 105 100 m2. The thickness of the grid is 1.5~6 m. The maximum span is 108 m and the maximum overhang length is about 39 m. Reasonable partitioning is performed according to the different floors where the grid frame projection is located, and the different sections are used to lift the blocks. After accumulating the cross-level accumulation, the supplementary levers between the grid sections are installed and assembled. The whole grid is raised to the design level. This construction method reduces the assembled height of the grid frame, has simple construction and high safety performance, saves the amount of measures, and greatly improves the construction efficiency of the grid frame structure.
Keywords: steel structures; grids; assembly; overall lifting
996 0 0
文字:     A-     A+     默认 取消