新型水下聚凝充填材料配合比及力学性能试验研究

作者:阮艳妹 罗旭 卢晓智 梅源
单位:广州地铁设计研究院股份有限公司 西安建筑科技大学土木工程学院 陕西省岩土与地下空间工程重点实验室
摘要:为了配制既满足工作性能又能达到基本力学性能要求的新型水下聚凝充填材料(NWC-FM),从盾构泥入手,用X射线、扫描电镜(SEM)和光学显微镜分析其微观形貌、孔径分布及宏观性能,基于此初步确定5组配合比,并通过力学性能试验进行验证。结果表明,NWC-2组试块弹性模量最大,抵抗变形的能力最大; NWC-2组试块峰值应力最大,为10.25MPa,NWC-4组试块峰值应力次之,为7.76MPa,NWC-5组试块峰值应力最小,为2.462MPa。经分析调整,选取NWC-5组作为最优配合比,且满足配制要求。
关键词:水下聚凝充填材料配合比力学性能抗压强度微观
作者简介:阮艳妹,高级工程师,E-mail:37763986@qq.com。
基金:陕西省重点研发项目(2020SF-373)。 -页码-:83-86,90
尊敬的用户,本篇文章需要20元,点击支付交费后阅读
参考文献[1] 景瑞旭,武俊文,王向东.突出煤层附近小型岩溶构造的危害及治理方法[J].山西焦煤科技,2019,43(11):12-14.
[2] 冯国倍.简析岩溶地质的危害及处理措施[J].西部资源,2018(1):60-61.
[3] 但新球,贺东北,吴协保,等.中国岩溶地区生态特征与石漠化危害探讨[J].中南林业调查规划,2018,37(1):62-66.
[4] 陈淼淼.水下不分散混凝土在淀东排涝泵闸海漫段中的应用[J].四川水泥,2019(3):216.
[5] 黄汉洋,李力,腊润涛,等.水下灌注桩混凝土工作性能控制技术研究[J].广东建材,2019,35(8):6-8.
[6] 陶国荣,王梦赛,王宝民.水下不分散混凝土研究与开发进展[J].低温建筑技术,2019,41(6):25-30.
[7] WU S F,JIANG S F,SHEN S,et al.The mix ratio study of selfstressed anti-washout underwater concrete used in nondrainage strengthening[J].Materials,2019,12(2).
[8] 张勇林.水下不分散泡沫混凝土的抗分散性能研究[J].混凝土与水泥制品,2018(2):22-25.
[9] 刘明乐,裴良,杜保立,等.高强度水下不分散混凝土[J].广东建材,2018,34(8):10-12.
[10] 李金奎,张强.大体积海工混凝土温升及裂缝控制[J].混凝土,2019(10):155-160.
[11] 周昊,高尚,向军.Ⅱ级粉煤灰在高性能混凝土中的应用[J].公路,2019,64(9):123-125.
[12] 石新波.矿物掺合料对高性能混凝土抗氯离子渗透性能的影响[J].低温建筑技术,2019,41(8):18-20.
[13] 赵聪,魏金梅.Ⅱ级粉煤灰在高性能混凝土中应用的初步探索[J].公路,2019,64(9):117-119.
[14] 于本田,王起才,周立霞,等.矿物掺合料与水胶比对混凝土耐久性的影响研究[J].硅酸盐通报,2012,31(2):391-395,410.
[15] 于本田,王起才,张粉芹,等.粗骨料对混凝土性能影响的试验研究[J].硅酸盐通报,2011,30(6):1371-1375.
Experimental Research on the Mixing Ratio and Mechanical Properties of New Type of Underwater Coagulant Filling Material
RUAN Yanmei LUO Xu LU Xiaozhi MEI Yuan
(Guangzhou Metro Design & Research Institute Co.,Ltd. College of Civil Engineering,Xi'an University of Architecture and Technology Shaanxi Key Lab of Geotechnical and Underground Space Engineering (XAUAT))
Abstract: In order to make both can satisfy the working performance and can meet the requirements of basic mechanical properties of a new type of under water coagulant filling material,this article obtains from the shield of mud,with X-ray phase analysis( X-ray diffraction,XRD),scanning electron microscopy( SEM) and optical microscope analyses the microscopic morphology,pore size distribution and the performance of the macro analysis. Based on this,the five sets of mix ratios were preliminarily determined and verified by mechanical performance tests. The results show that the elastic modulus of NWC-2 test is the largest,and the ability to resist deformation is the largest. The maximum peak stress of NWC-2 test is 10. 25 MPa,followed by 7. 76 MPa for NWC-4 test,and 2. 462 MPa for NWC-5 test.Through analysis and adjustment,NWC-5 group is selected as the optimal mix ratio,and meets the requirements of the preparation.
Keywords: underwater coagulant filling material; mix ratio; mechanical properties; compressive strength; micro
950 0 0
文字:     A-     A+     默认 取消